GRECA 70/18
Position of center of gravity : 9.56
GRECA 72/5
TO 76/18 - 15 ondes
Position of center of gravity : 8.68
TOG 77/20
Position of center of gravity : 8.95
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.45 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.8 | -0.2 | +0.3 |
| Length (mm) |
mm | - | -5 | +30 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | 5.74 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 83 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.45 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | -5 | +30 |
| Useful width | mm | 1008 | -8 | +8 |
| Total width | mm | 1125 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 90 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.4 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | -5 | +30 |
| Useful width | mm | 988 | -8 | +8 |
| Total width | mm | 1112 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 2.98 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 45 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.45 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | -5 | +30 |
| Useful width | mm | 1008 | -8 | +8 |
| Total width | mm | 1133 | -7 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 5.6 | - | - |
| Minimum bend radius | m | 3 | - | - |
| Nominal light transmission | % compared to air | 90 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.4 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | -5 | +30 |
| Useful width | mm | 988 | -8 | +8 |
| Total width | mm | 1112 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 2.98 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 90 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.45 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | -5 | +30 |
| Useful width | mm | 1008 | -8 | +8 |
| Total width | mm | 1133 | -7 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | 3 | - | - |
| Nominal light transmission | % compared to air | 90 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.45 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.8 | -0.2 | +0.2 |
| Length (mm) |
mm | - | -5 | +30 |
| Useful width | mm | 1008 | -8 | +8 |
| Total width | mm | 1133 | -7 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | 5.6 | - | - |
| Minimum bend radius | m | 3 | - | - |
| Nominal light transmission | % compared to air | <1 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.45 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | -5 | +30 |
| Useful width | mm | 1008 | -8 | +8 |
| Total width | mm | 1133 | -7 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | 5.6 | - | - |
| Minimum bend radius | m | 3 | - | - |
| Nominal light transmission | % compared to air | 85 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.45 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | -5 | +30 |
| Useful width | mm | 1008 | -8 | +8 |
| Total width | mm | 1133 | -7 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | 5.6 | - | - |
| Minimum bend radius | m | 3 | - | - |
| Nominal light transmission | % compared to air | 80 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
RENOLIT ONDEX BIO
The control of light!
The range of ONDEX BIO sheets was designed for claddings and roof coverings of greenhouses and garden centres.
ONDEX BIO sheets, available in 4 colour shades from crystal to opaque, are suitable for all types of cultures and are also used for storage buildings or technical premises.
RENOLIT ONDEX Bio 2
For all types of greenhouses
ONDEX BIO 2 sheets have been used for more than 30 years throughout the world ;
they adapt to all types of applications :
• roofings
• claddings
• gables
• openings
• partitions
Warranties:
Up to 10-year manufacturer's warranty.(on request)
