130/20
130/30 - 8 ondes
Position of center of gravity : 15.5
137.5/17.5
150/45
Position of center of gravity : 16.42
160/18 - Laukien
207/35 (32) Hoesch
Position of center of gravity : 10.8
207/35 (36) Fischer (2007)
210/35
214/22 Laukien
3/333/45 Nervesco 1000
G.O. 177/51 - 5 1/2 ondes
Position of center of gravity : 25.95
G.O. 177/51 - 6 1/2 ondes
Position of center of gravity : 25.95
G.O. 177/51 - 6 3/4 ondes
G.O. 177/51 -7 ondes
GRECA 70/18
Nervuré 25/1070 B
TO 76/18 - 12 ondes
Position of center of gravity : 8.68
TO 76/18 - 15 ondes
Position of center of gravity : 8.68
TO 76/18 - 9 ondes
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | 4 | 8 |
| Useful width | mm | 980 | +2 | +8 |
| Total width | mm | 1095 | -2 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 6.46 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | NA | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 6.46 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 82 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.95 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 988 | -8 | +8 |
| Total width | mm | 1106 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 2.98 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 82 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.65 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1 | -0.1 | +0.1 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 532 | -5 | +5 |
| Total width | mm | 666 | -6 | +6 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 80 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 6.46 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 66 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 910 | -8 | +8 |
| Total width | mm | 1000 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 11.07 | - | - |
| Minimum bend radius | m | 11 | - | - |
| Nominal light transmission | % compared to air | 82 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1070 | -8 | +8 |
| Total width | mm | 1133 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 82 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.2 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1035 | -8 | +8 |
| Total width | mm | 1080 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 17.07 | - | - |
| Minimum bend radius | m | 11 | - | - |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.6 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1050 | -8 | +8 |
| Total width | mm | 1115 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.6 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1040 | -8 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 708 | -8 | +8 |
| Total width | mm | 920 | -8 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 36.37 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 82 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 760 | -6 | +6 |
| Total width | mm | 878 | -7 | +7 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 2.98 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 83 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1100 | -8 | +8 |
| Total width | mm | 1148 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.35 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.2 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1100 | -5 | +5 |
| Total width | mm | 1131 | -5 | +5 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 708 | -8 | +8 |
| Total width | mm | 920 | -8 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 36.37 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 61 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 885 | -8 | +8 |
| Total width | mm | 1097 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 36.37 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 61 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 6.46 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 61 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.45 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.2 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1035 | -8 | +8 |
| Total width | mm | 1080 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | 11 | - | - |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.45 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1062 | -8 | +8 |
| Total width | mm | 1152 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 82 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.4 | 0.1 | 0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | 0.2 | 0.3 |
| Length (mm) |
mm | - | 4 | 8 |
| Useful width | mm | 1070 | 8 | 8 |
| Total width | mm | 1106 | 8 | 8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 8.14 | - | - |
| Minimum bend radius | m | NA | - | - |
| Nominal light transmission | % compared to air | 82 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 885 | -8 | +8 |
| Total width | mm | 1097 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 36.37 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 82 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 885 | -8 | +8 |
| Total width | mm | 1097 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 36.37 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | NA | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 6.46 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | <1 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.05 | NA |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 6.46 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | NA | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | 4 | 8 |
| Useful width | mm | 980 | +2 | +8 |
| Total width | mm | 1095 | -2 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 6.46 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | NA | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.6 | 0.1 | 0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1 | 0.2 | 0.3 |
| Length (mm) |
mm | - | 4 | 8 |
| Useful width | mm | 1000 | 8 | 8 |
| Total width | mm | 1053 | 8 | 8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 8.14 | - | - |
| Minimum bend radius | m | NA | - | - |
| Nominal light transmission | % compared to air | 60 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 900 | -8 | +8 |
| Total width | mm | 952 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 39.96 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | <1 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | 4 | 8 |
| Useful width | mm | 980 | +2 | +8 |
| Total width | mm | 1095 | -2 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 6.46 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | NA | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 900 | -8 | +8 |
| Total width | mm | 952 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 39.96 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | NA | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 900 | -8 | +8 |
| Total width | mm | 952 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 39.96 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | NA | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 885 | -8 | +8 |
| Total width | mm | 1097 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 36.37 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | <1 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 885 | -8 | +8 |
| Total width | mm | 1097 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 36.37 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 65 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 708 | -8 | +8 |
| Total width | mm | 920 | -8 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 36.37 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 61 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.5 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 6.46 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 61 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.4 | 0.1 | 0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | 0.2 | 0.3 |
| Length (mm) |
mm | - | 4 | 8 |
| Useful width | mm | 1070 | 8 | 8 |
| Total width | mm | 1106 | 8 | 8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 8.14 | - | - |
| Minimum bend radius | m | NA | - | - |
| Nominal light transmission | % compared to air | 61 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.6 | 0.1 | 0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1 | 0.2 | 0.3 |
| Length (mm) |
mm | - | 4 | 8 |
| Useful width | mm | 1000 | 8 | 8 |
| Total width | mm | 1053 | 8 | 8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 8.14 | - | - |
| Minimum bend radius | m | NA | - | - |
| Nominal light transmission | % compared to air | 60 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.45 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 0.9 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1062 | -8 | +8 |
| Total width | mm | 1162 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 60 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
RENOLIT ONDEX SOLLUX
Solutions for all constructions
Thanks to the qualities of ONDEX bi-stretched PVC, RENOLIT ONDEX SOLLUX is especially suitable for uses in the agricultural environment
A maximum life span
• lasting luminous transmission
• limited dirtying thanks to a smooth and homogeneous material
(No moss)
• excellent resistance to chemical aggressions
• easy to clean for maximum hygiene
Increased mechanical resistance to :
• hail
• pebble projections
• snow falls
Warranties:
Up to 7-year manufacturer's warranty. (on request)
