124/29
Position of center of gravity : 7.57
130/30 - 8 ondes
Position of center of gravity : 15.6
146/48 Big 6
Position of center of gravity : 24.65
150/45
Position of center of gravity : 16.4
160/32 Tegral R32
183/40 Fischer (2007)
183/40 Hoesch
Position of center of gravity : 14.35
200/33
207/35 (31) Arcelor
207/35 (32) Hoesch
Position of center of gravity : 11.12
207/35 (36) Fischer (2007)
250/50 Hoesch
Position of center of gravity : 18.13
3/333/39 Haironville
Position of center of gravity : 8.04
3/333/45 Nervesco 1000
Position of center of gravity : 9.37
4/250/40 Cobacier 1004
Position of center of gravity : 9.7
EURO 92
Position of center of gravity : 14.13
G.O. 177/51 - 5 1/2 ondes
Position of center of gravity : 26.05
G.O. 177/51 - 6 1/2 ondes
Position of center of gravity : 26.05
G.O. 177/51 - 6 3/4 ondes
GRECA 70/18
Position of center of gravity : 9.78
TO 76/18 - 11 ondes
TO 76/18 - 12 ondes
Position of center of gravity : 8.7
TO 76/18 - 14 ondes
TO 76/18 - 15 ondes
Position of center of gravity : 8.7
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.2 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 7.91 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 45 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 7.91 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 80 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.75 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 988 | -8 | +8 |
| Total width | mm | 1106 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 3.3 | - | - |
| Minimum bend radius | m | 3.5 | - | - |
| Nominal light transmission | % compared to air | 80 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.1 | +0.1 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 684 | -6 | +6 |
| Total width | mm | 820 | -7 | +7 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | 3.5 | - | - |
| Nominal light transmission | % compared to air | 81 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2.05 | -0.1 | NA |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 900 | -8 | +8 |
| Total width | mm | 952 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 43.95 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 992 | -8 | +8 |
| Total width | mm | 1061 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 20.39 | - | - |
| Minimum bend radius | m | 9 | - | - |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.75 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 910 | -8 | +8 |
| Total width | mm | 1000 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 13.3 | - | - |
| Minimum bend radius | m | 11 | - | - |
| Nominal light transmission | % compared to air | 80 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 7.91 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 63 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.15 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1000 | -6 | +6 |
| Total width | mm | 1040 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 60.3 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 915 | -6 | +6 |
| Total width | mm | 958 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 41.47 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1035 | -8 | +8 |
| Total width | mm | 1080 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 25.6 | - | - |
| Minimum bend radius | m | 11 | - | - |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 885 | -8 | +8 |
| Total width | mm | 1097 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 44.45 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 80 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1000 | -6 | +6 |
| Total width | mm | 1083 | -6 | +6 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 708 | -8 | +8 |
| Total width | mm | 920 | -8 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 44.45 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 80 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.75 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 912 | -8 | +8 |
| Total width | mm | 1058 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | 3.5 | - | - |
| Nominal light transmission | % compared to air | 81 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2.2 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.3 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1022 | -6 | +6 |
| Total width | mm | 1087 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 30.78 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.75 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 760 | -6 | +6 |
| Total width | mm | 878 | -7 | +7 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 3.3 | - | - |
| Minimum bend radius | m | 3.5 | - | - |
| Nominal light transmission | % compared to air | 80 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.15 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +5 | +30 |
| Useful width | mm | 960 | -6 | +6 |
| Total width | mm | 1028 | -6 | +6 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 708 | -8 | +8 |
| Total width | mm | 920 | -8 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 44.45 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 55 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 7.91 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 55 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 885 | -8 | +8 |
| Total width | mm | 1097 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 44.45 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 55 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2.1 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1000 | -8 | +8 |
| Total width | mm | 1062 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 31 | - | - |
| Minimum bend radius | m | 9 | - | - |
| Nominal light transmission | % compared to air | 55 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1000 | -8 | +8 |
| Total width | mm | 1055 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 20.34 | - | - |
| Minimum bend radius | m | 20 | - | - |
| Nominal light transmission | % compared to air | 55 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1035 | -8 | +8 |
| Total width | mm | 1080 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | 11 | - | - |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 915 | -6 | +6 |
| Total width | mm | 970 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1000 | -8 | +8 |
| Total width | mm | 1050 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 26.96 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 55 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1062 | -8 | +8 |
| Total width | mm | 1152 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 80 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1035 | -8 | +8 |
| Total width | mm | 1068 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 79 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2.1 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1000 | -8 | +8 |
| Total width | mm | 1062 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 31 | - | - |
| Minimum bend radius | m | 9 | - | - |
| Nominal light transmission | % compared to air | NA | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2.1 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1000 | -8 | +8 |
| Total width | mm | 1062 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 31 | - | - |
| Minimum bend radius | m | 9 | - | - |
| Nominal light transmission | % compared to air | <1 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2.1 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1000 | -8 | +8 |
| Total width | mm | 1062 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 31 | - | - |
| Minimum bend radius | m | 9 | - | - |
| Nominal light transmission | % compared to air | 22 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 885 | -8 | +8 |
| Total width | mm | 1097 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 44.45 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | NA | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 885 | -8 | +8 |
| Total width | mm | 1097 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 44.45 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | <1 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 7.91 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | NA | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 7.91 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | <1 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 7.91 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 25 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 7.91 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | NA | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +10 | +16 |
| Useful width | mm | 900 | -8 | +8 |
| Total width | mm | 952 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 43.95 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 53 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1000 | -8 | +8 |
| Total width | mm | 1053 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 32 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 55 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 708 | -8 | +8 |
| Total width | mm | 920 | -8 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 44.45 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 55 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 885 | -8 | +8 |
| Total width | mm | 1097 | -10 | +10 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 44.45 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 55 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.75 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +30 |
| Useful width | mm | 760 | -6 | +6 |
| Total width | mm | 878 | -7 | +7 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 3.3 | - | - |
| Minimum bend radius | m | 3.5 | - | - |
| Nominal light transmission | % compared to air | 55 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.75 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 988 | -8 | +8 |
| Total width | mm | 1106 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 3.3 | - | - |
| Minimum bend radius | m | 3.5 | - | - |
| Nominal light transmission | % compared to air | 55 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1000 | -8 | +8 |
| Total width | mm | 1055 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 20.34 | - | - |
| Minimum bend radius | m | 20 | - | - |
| Nominal light transmission | % compared to air | 53 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1000 | -8 | +8 |
| Total width | mm | 1050 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 26.96 | - | - |
| Minimum bend radius | m | 18 | - | - |
| Nominal light transmission | % compared to air | 53 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2.1 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1000 | -8 | +8 |
| Total width | mm | 1062 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 31 | - | - |
| Minimum bend radius | m | 9 | - | - |
| Nominal light transmission | % compared to air | 53 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 980 | -2 | +8 |
| Total width | mm | 1095 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 7.91 | - | - |
| Minimum bend radius | m | 2.5 | - | - |
| Nominal light transmission | % compared to air | 55 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +2 | +8 |
| Useful width | mm | 1035 | -8 | +8 |
| Total width | mm | 1080 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 25.6 | - | - |
| Minimum bend radius | m | 11 | - | - |
| Nominal light transmission | % compared to air | 53 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.9 | -0.1 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | -0.2 | +0.3 |
| Length (mm) |
mm | - | +5 | +30 |
| Useful width | mm | 1035 | -8 | +8 |
| Total width | mm | 1080 | -8 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 0.5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | 11 | - | - |
| Nominal light transmission | % compared to air | 53 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
RENOLIT ONDEX HR - High Resistance
The reference in roofing and cladding
RENOLIT ONDEX BI-STRETCHED PVC sheets in the High Resistance range are designed for use in roofing and cladding.
They are particularly suitable for industrial construction.
The qualities of RENOLIT ONDEX HR sheets are such that they can be used in the most difficult environments for high quality constructions:
• Sustainability, durability;
• Strength, 1200 J shock-resistance, mechanical strength, hail and sport ball resistant;
• Fire classification M1, class 1, B1, B s1 d0 (BS476-Part 7, Euroclasses), Γ1, self-extinguishing, smoke extraction;
• Adapted light (crystal, translucid, diffusing ivory or opaque);
• Low temperature resistant
• Weather resistant (rain, snow or wind);
• Ageing resistant (bi-stretching and coextrusion combined);
• Bendability for use on a bent structure (concave or convex);
• Watertightness (dimensional stability);
• Resistant to salt climates;
• Chemical resistance (wide range of resistance);
• Technical certification (Avis Techniques CSTB, 1200 J, Zulassung, ITB Aprobata techniczna, VUPS Certificaeni spolecnost, BG Bau, Class B non-fragile…).
Warranties:
Up to 10 years depending on the legal warranties in force in the country. (on request)
