Faitière à charnière GO 177/51

Faitière à charnière GRECA 70/18

Faitière à charnière TO 76/18

Faitière de shed GO 177/51 - 80°

Faitière de shed GRECA 70/18 - 80°

Faitière de shed TO 76/18 - 80°

Pare vent grand modèle / H350 / 325-80-190

Pare vent petit modèle / H225 / 190-80-190

Solin frontal GO 177/51 - 100°

Solin frontal GRECA 70/18 - 100°

Solin frontal TO 76/18 - 100°

Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | |||
Thickness (according to standard EN-1013-3) | mm | |||
Length (mm) |
mm | - | ||
Useful width | mm | |||
Total width | mm | |||
Squareness outside max. square (according to standard EN-1013-3) | mm | - | - | |
Inertia for width of 1 m | Cm4 | - | - | |
Minimum bend radius | m | - | - | |
Nominal light transmission | % compared to air | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | |||
Thickness (according to standard EN-1013-3) | mm | |||
Length (mm) |
mm | - | ||
Useful width | mm | |||
Total width | mm | |||
Squareness outside max. square (according to standard EN-1013-3) | mm | - | - | |
Inertia for width of 1 m | Cm4 | - | - | |
Minimum bend radius | m | - | - | |
Nominal light transmission | % compared to air | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | |||
Thickness (according to standard EN-1013-3) | mm | |||
Length (mm) |
mm | - | ||
Useful width | mm | |||
Total width | mm | |||
Squareness outside max. square (according to standard EN-1013-3) | mm | - | - | |
Inertia for width of 1 m | Cm4 | - | - | |
Minimum bend radius | m | - | - | |
Nominal light transmission | % compared to air | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | |||
Thickness (according to standard EN-1013-3) | mm | |||
Length (mm) |
mm | - | ||
Useful width | mm | |||
Total width | mm | |||
Squareness outside max. square (according to standard EN-1013-3) | mm | - | - | |
Inertia for width of 1 m | Cm4 | - | - | |
Minimum bend radius | m | - | - | |
Nominal light transmission | % compared to air | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | |||
Thickness (according to standard EN-1013-3) | mm | |||
Length (mm) |
mm | - | ||
Useful width | mm | |||
Total width | mm | |||
Squareness outside max. square (according to standard EN-1013-3) | mm | - | - | |
Inertia for width of 1 m | Cm4 | - | - | |
Minimum bend radius | m | - | - | |
Nominal light transmission | % compared to air | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | |||
Thickness (according to standard EN-1013-3) | mm | |||
Length (mm) |
mm | - | ||
Useful width | mm | |||
Total width | mm | |||
Squareness outside max. square (according to standard EN-1013-3) | mm | - | - | |
Inertia for width of 1 m | Cm4 | - | - | |
Minimum bend radius | m | - | - | |
Nominal light transmission | % compared to air | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | |||
Thickness (according to standard EN-1013-3) | mm | |||
Length (mm) |
mm | - | ||
Useful width | mm | |||
Total width | mm | |||
Squareness outside max. square (according to standard EN-1013-3) | mm | - | - | |
Inertia for width of 1 m | Cm4 | - | - | |
Minimum bend radius | m | - | - | |
Nominal light transmission | % compared to air | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | |||
Thickness (according to standard EN-1013-3) | mm | |||
Length (mm) |
mm | - | ||
Useful width | mm | |||
Total width | mm | |||
Squareness outside max. square (according to standard EN-1013-3) | mm | - | - | |
Inertia for width of 1 m | Cm4 | - | - | |
Minimum bend radius | m | - | - | |
Nominal light transmission | % compared to air | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | |||
Thickness (according to standard EN-1013-3) | mm | |||
Length (mm) |
mm | - | ||
Useful width | mm | |||
Total width | mm | |||
Squareness outside max. square (according to standard EN-1013-3) | mm | - | - | |
Inertia for width of 1 m | Cm4 | - | - | |
Minimum bend radius | m | - | - | |
Nominal light transmission | % compared to air | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | |||
Thickness (according to standard EN-1013-3) | mm | |||
Length (mm) |
mm | - | ||
Useful width | mm | |||
Total width | mm | |||
Squareness outside max. square (according to standard EN-1013-3) | mm | - | - | |
Inertia for width of 1 m | Cm4 | - | - | |
Minimum bend radius | m | - | - | |
Nominal light transmission | % compared to air | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | |||
Thickness (according to standard EN-1013-3) | mm | |||
Length (mm) |
mm | - | ||
Useful width | mm | |||
Total width | mm | |||
Squareness outside max. square (according to standard EN-1013-3) | mm | - | - | |
Inertia for width of 1 m | Cm4 | - | - | |
Minimum bend radius | m | - | - | |
Nominal light transmission | % compared to air | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.