30COPPI
FRANCESE
ICOPPO
ICOPPO Venezia
NORDIKA
ROMANA
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 3.5 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 1.8 | -0.1 | +0.2 |
| Length (mm) |
mm | - | -10 | +10 |
| Useful width | mm | 1092 | -8 | +8 |
| Total width | mm | 1180 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 3.5 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 1.8 | -0.1 | +0.2 |
| Length (mm) |
mm | - | ||
| Useful width | mm | 1040 | -8 | +8 |
| Total width | mm | 1170 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 3.5 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 1.8 | -0.1 | +0.2 |
| Length (mm) |
mm | - | ||
| Useful width | mm | 1040 | -8 | +8 |
| Total width | mm | 1170 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 3.9 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 1.8 | -0.1 | +0.2 |
| Length (mm) |
mm | - | ||
| Useful width | mm | 910 | -7 | +7 |
| Total width | mm | 990 | -7 | +7 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 4.5 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 2 | -0.2 | +0.2 |
| Length (mm) |
mm | - | ||
| Useful width | mm | 910 | -7 | +7 |
| Total width | mm | 990 | -7 | +7 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 3.5 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 1.8 | -0.1 | +0.2 |
| Length (mm) |
mm | - | -10 | +10 |
| Useful width | mm | 1092 | -8 | +8 |
| Total width | mm | 1180 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 3.5 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 1.8 | -0.1 | +0.2 |
| Length (mm) |
mm | - | -10 | +10 |
| Useful width | mm | 1092 | -8 | +8 |
| Total width | mm | 1180 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 3.5 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 1.8 | -0.1 | +0.2 |
| Length (mm) |
mm | - | ||
| Useful width | mm | 1040 | -8 | +8 |
| Total width | mm | 1170 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 3.5 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 1.8 | -0.1 | +0.2 |
| Length (mm) |
mm | - | ||
| Useful width | mm | 1040 | -8 | +8 |
| Total width | mm | 1170 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 3.5 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 1.8 | -0.1 | +0.2 |
| Length (mm) |
mm | - | -10 | +10 |
| Useful width | mm | 1092 | -8 | +8 |
| Total width | mm | 1180 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 4.3 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 2 | -0.1 | +0.2 |
| Length (mm) |
mm | - | ||
| Useful width | mm | 900 | -6 | +6 |
| Total width | mm | 980 | -7 | +7 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 4.3 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 2 | -0.1 | +0.2 |
| Length (mm) |
mm | - | ||
| Useful width | mm | 900 | -6 | +6 |
| Total width | mm | 980 | -7 | +7 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 4.3 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 2 | -0.1 | +0.2 |
| Length (mm) |
mm | - | ||
| Useful width | mm | 900 | -6 | +6 |
| Total width | mm | 980 | -7 | +7 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 3.5 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 1.8 | -0.1 | +0.2 |
| Length (mm) |
mm | - | ||
| Useful width | mm | 1040 | -8 | +8 |
| Total width | mm | 1170 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 4.5 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 2 | -0.2 | +0.2 |
| Length (mm) |
mm | - | ||
| Useful width | mm | 910 | -7 | +7 |
| Total width | mm | 990 | -7 | +7 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 4.3 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 2 | -0.1 | +0.2 |
| Length (mm) |
mm | - | ||
| Useful width | mm | 900 | -6 | +6 |
| Total width | mm | 980 | -7 | +7 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 4.5 | -0.3 | +0.3 |
| Thickness (according to standard EN-1013-3) | mm | 2.4 | -0.1 | +0.2 |
| Length (mm) |
mm | - | ||
| Useful width | mm | 1050 | -8 | +8 |
| Total width | mm | 1180 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | NA | - | - |
| Minimum bend radius | m | NA | - | - |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 4.5 | -0.3 | +0.3 |
| Thickness (according to standard EN-1013-3) | mm | 2.4 | -0.1 | +0.2 |
| Length (mm) |
mm | - | ||
| Useful width | mm | 1050 | -8 | +8 |
| Total width | mm | 1180 | -9 | +9 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | NA | - | - |
| Minimum bend radius | m | NA | - | - |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 4.3 | -0.2 | +0.2 |
| Thickness (according to standard EN-1013-3) | mm | 2 | -0.1 | +0.2 |
| Length (mm) |
mm | - | ||
| Useful width | mm | 900 | -6 | +6 |
| Total width | mm | 980 | -7 | +7 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | - | - | |
| Minimum bend radius | m | - | - | |
| Nominal light transmission | % compared to air | 0 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
HSP® – sheeting product – High Strength Polymer is a composite layered material.
HSP is obtained by the convergence of three different individually extruded thermoplastic layers at a terminal extrusion head. The result is a single sheet that is stratified in three different layers, each of which is optimised to perform certain functions.
