TOG 77/20
Position of center of gravity : 8.95
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 1.6 | -0.05 | +0.05 |
| Thickness (according to standard EN-1013-3) | mm | 1 | -0.2 | +0.3 |
| Length (mm) |
mm | - | -5 | +30 |
| Useful width | mm | 1008 | -8 | +8 |
| Total width | mm | 1133 | -7 | +8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | 6.21 | - | - |
| Minimum bend radius | m | 3 | - | - |
| Nominal light transmission | % compared to air | 90 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
RENOLIT ONDEX Bio 3
The top-of-the-range for greenhouses
RENOLIT ONDEX BIO 3 sheets are the thickest of the range and benefit from a reinforced UV protection.
They are mainly designed for cyclone regions
• maximum gap between purlins
• Increased light in the greenhouse because of a reduced number of supports
• reinforced mechanical resistance
• reinforced UV protection
Warranties:
Up to 12-year manufacturer's warranty. (on request)
