Capot GRECA 70/18
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2 | 0.05 | NA |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | 1 | 1.5 |
| Length (mm) |
mm | - | 1540 | 1560 |
| Useful width | mm | NA | 8 | 8 |
| Total width | mm | 1095 | 8 | 8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | NA | - | - |
| Minimum bend radius | m | 0.35 | - | - |
| Nominal light transmission | % compared to air | 62 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2 | 0.05 | NA |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | 1 | 1.5 |
| Length (mm) |
mm | - | 1700 | 1720 |
| Useful width | mm | NA | 8 | 8 |
| Total width | mm | 1095 | 8 | 8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | NA | - | - |
| Minimum bend radius | m | 0.4 | - | - |
| Nominal light transmission | % compared to air | 62 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2 | 0.05 | NA |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | 1 | 1.5 |
| Length (mm) |
mm | - | 1940 | 1960 |
| Useful width | mm | NA | 8 | 8 |
| Total width | mm | 1095 | 8 | 8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | NA | - | - |
| Minimum bend radius | m | 0.475 | - | - |
| Nominal light transmission | % compared to air | 62 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2 | 0.05 | NA |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | 1 | 1.5 |
| Length (mm) |
mm | - | 2250 | 2270 |
| Useful width | mm | NA | 8 | 8 |
| Total width | mm | 1095 | 8 | 8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | NA | - | - |
| Minimum bend radius | m | 0.575 | - | - |
| Nominal light transmission | % compared to air | 62 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2 | 0.05 | NA |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | 1 | 1.5 |
| Length (mm) |
mm | - | 2570 | 2590 |
| Useful width | mm | NA | 8 | 8 |
| Total width | mm | 1095 | 8 | 8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | NA | - | - |
| Minimum bend radius | m | 0.675 | - | - |
| Nominal light transmission | % compared to air | 62 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2 | 0.05 | NA |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | 1 | 1.5 |
| Length (mm) |
mm | - | 2960 | 2980 |
| Useful width | mm | NA | 8 | 8 |
| Total width | mm | 1095 | 8 | 8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | NA | - | - |
| Minimum bend radius | m | 0.8 | - | - |
| Nominal light transmission | % compared to air | 62 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
| Units | Nominal value | Tolerance | ||
|---|---|---|---|---|
| Mini | Maxi | |||
| Weight | Kg/m2 | 2 | 0.05 | NA |
| Thickness (according to standard EN-1013-3) | mm | 1.2 | 1 | 1.5 |
| Length (mm) |
mm | - | 3270 | 3290 |
| Useful width | mm | NA | 8 | 8 |
| Total width | mm | 1095 | 8 | 8 |
| Squareness outside max. square (according to standard EN-1013-3) | mm | 5 | - | - |
| Inertia for width of 1 m | Cm4 | NA | - | - |
| Minimum bend radius | m | 0.9 | - | - |
| Nominal light transmission | % compared to air | 62 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
RENOLIT ONDEX COVERS
Pre-formed corrugated sheets for conveyor belt housings
Material
ONDEX covers are pre-formed corrugated sheets manufactured with translucent GRECA 70 x 18 sheets. They are bent in factory and benefit from the ONDEX PVC sheets qualities :
• Resistance to corrosion and chemical agression
• Fire classification B1 (self-extinguishable and non-flamable)
• Limited dirtying thanks to a smooth and homogeneous
material
• Low weight
• Transparency
Applications
Thanks to their shape and qualities, ONDEX covers are particularly suitable for the protection of conveyor belt housings in factories, warehouses, port areas and outdoors.
• Their resistance to corrosion makes a use in marine environments possible.
• Thanks to their resistance to many chemical products, they can
be used in the food and chemical industries.
• The wide range of dimensions meet each project.
• Their transparency enables the follow-up and the maintenance of
the conveyor belt housing.
