150/45 - Nw 5 - 135->145°

150/45 - Nw 6 - 145->155°

Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | -10 | +10 |
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | +0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.1 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
Characteristics
Units | Nominal value | Tolerance | ||
---|---|---|---|---|
Mini | Maxi | |||
Weight | Kg/m2 | 2.05 | -0.05 | +0.05 |
Thickness (according to standard EN-1013-3) | mm | 1.1 | -0.22 | +0.22 |
Length (mm) |
mm | - | -10 | +10 |
Useful width | mm | 870 | ||
Total width | mm | 952 | ||
Squareness outside max. square (according to standard EN-1013-3) | mm | NA | - | - |
Inertia for width of 1 m | Cm4 | NA | - | - |
Minimum bend radius | m | NA | - | - |
Nominal light transmission | % compared to air | 57 | - | - |
Values applicable at an ambient temperature of 20°C
Some colours have been developed for specific projects. They are not stocked and are subject to minimum quantities. They may be subject to geographical limitations.
The information contained in this Web site is provided in good faith, solely for purposes of information. It is based on the state of our
knowledge at the time of writing. This information cannot be considered as a suggestion to use our products in contradiction to existing patents, national or local laws or rules. The purchaser alone ensures that he will meet the duty to provide information and advice to the final user.
Possible non-compliance on the part of the purchaser with these rules, instructions and duties can under no circumstances engage our
responsibility.
RENOLIT ONDEX LIGHT RIDGE (or ROOF LIGHTS)
Ventilated lighting ridge for farm buildings
Thanks to their shape and optical qualities the RENOLIT ONDEX LIGHT RIDGES are a practical, efficient and fast solution to make a ventilated lighting ridge
The RENOLIT ONDEX LIGHT RIDGES allow an easy installation. They are perfectly suited to new buildings and to renovation.
Material
The RENOLIT ONDEX LIGHT RIDGES are made with translucent bi-stretched sheets profile 150/45.
So they benefit from all qualities resulting from the bi-stretching process.
• Shock resistance
• Mechanical resistance
• Resistance to thermal shocks
• Hail resistance
Angles
STANDARD
- Nw5 : NOMINAL 140° - Mini 135° - Maxi 145°
- Nw6 : NOMINAL 150° - Mini 145° - Maxi 155°
On request
- Nw0 : NOMINAL 90° - Mini 85° - Maxi 95°
- Nw1 : NOMINAL 100° - Mini 95° - Maxi 105°
- Nw2 : NOMINAL 110° - Mini 105° - Maxi 115°
- Nw3 : NOMINAL 120° - Mini 115° - Maxi 125°
- Nw4 : NOMINAL 130° - Mini 125° - Maxi 135°
- Nw7 : NOMINAL 160° - Mini 155° - Maxi 165°
- Nw8 : NOMINAL 170° - Mini 165° - Maxi 175°
